I have a question on the size of Montgomery traps. Some are 5 inch inside the jaws, some 5 1/2 to 5 9/16 inside, some are 6 inch inside. Going to be selling them so I want to be certain the size trap when I post. Thanks
Dave

What's stamped on the pans?

Pans are unreadable, I'm thinking 1 3/4, 2, and 3.

I don't think Monty made a 1 3/4??? Is it a square jaw? Maybe a Northwoods?

Sounds like a #2 or 3

Are they original Montgomery or the Victor Montgomerys?

They all have Montgomery pans, the smaller 3 are dogless. I am not sure Northwoods made any dogless. Thanks for help.

They only made up to a #4....I think, so 1 1/2,2,3, & 4.

Mongomery made 1.5, 2, 3 and I believe a 4.

I'd have to hunt to find one of each size, lol. I know I have them though. I'll go outside in a bit and see if I can find them easily enough. Sounding like you probably have 1.5, 2 and 3.... or possibly 2, 3 and 4. You measuring across like this?

Only have #2 monties outside is 5 3/4. Inside is 5 1/4
Forgot to add mine are all dogless

OK I measured a known #2 and #3.

#2 inside just shy of 5"



#3 - 6 1/4"


That 1.5 in the pic I can't read the pan so not sure if it's a monty or NW so didn't include it.

Ok thank all of you for the replies, it appears I have 1 1/2s, 2s and 3s. I appreciate it. And yes yotetrapper, I was measuring inside the jaws like your picture. Thanks.
Dave