No Profanity *** No Flaming *** No Advertising *** No Anti Trappers ***NO POLITICS
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter


Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting~The Pen and Quill

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum~ Fermenter's Forum


~~~ Dobbins' Products Catalog ~~~


Minnesota Trapline Products
Please support our sponsor for the Trappers Talk Page - Minnesota Trapline Products


Print Thread
Hop To
Page 1 of 2 1 2
Beaver tips and helps wanted #8678518
10/23/26 08:58 PM
10/23/26 08:58 PM
Joined: May 2026
Manitoba
W
Wild Trapper Offline OP
trapper
Wild Trapper  Offline OP
trapper
W

Joined: May 2026
Manitoba
I'm new to trapping so I'm looking for tips on fleshing and boarding beaver.
Like how to know which line to go by on the board when forming them.
Maybe I'm just dumb but how is frost fleshing done?
Any other tips are appreciated.


Wild Trapper
Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678526
10/23/26 09:12 PM
10/23/26 09:12 PM
Joined: Apr 2007
ohio
Ohio Wolverine Offline
trapper
Ohio Wolverine  Offline
trapper

Joined: Apr 2007
ohio
Frost fleshing in done by placing the hide in freezing temperatures , to stiffening the fat, it peels off much easier than warm slimy fat.
Stretching is by pulling the hide to the bottom and pinning it, then going from side to side to a line that is tight, but not causing the hide to show hide weakness at the stretch point.
A little practice will teach you more than anyone can really explain.
It's better to under stretch than over stretch .
Practice will show you.
Just the way I learned by myself , not many around that caught beaver when I learned in my area.


We have met the enemy and the enemy is us!
Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678543
10/23/26 10:10 PM
10/23/26 10:10 PM
Joined: May 2026
Manitoba
W
Wild Trapper Offline OP
trapper
Wild Trapper  Offline OP
trapper
W

Joined: May 2026
Manitoba
Another thing I was wondering is do you wash dirty beaver before or after skinning?


Wild Trapper
Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678544
10/23/26 10:14 PM
10/23/26 10:14 PM
Joined: Dec 2006
Oregon
beaverpeeler Offline
trapper
beaverpeeler  Offline
trapper

Joined: Dec 2006
Oregon
After the first eight nails you should see easily if you're on the right line. For good beaver I'd slightly understretch to make shearing grade. For hatter types stretch it as hard as you can---size=$$$

I clean skin and advocate for that approach as it in my opinion the best and least work. Afterwards you nail out your beaver and run over it a little with scraper to pull off any grease or tidbits of meat or fat you missed. Easy peasy. You're done! No need to frostscape...I've never done one that way and have oodles of handling awards.


My fear of moving stairs is escalating!
Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678624
10/24/26 07:10 AM
10/24/26 07:10 AM
Joined: Dec 2024
AR
J
J Staton Offline
trapper
J Staton  Offline
trapper
J

Joined: Dec 2024
AR
Been a bit since I've put up beaver but if I remember correctly you measure hanging length of beaver, divide by half, and add that measurement to hanging length to get rough estimate on which line to stretch to.
(Hanging length/2) + hanging length= estimated stretch

Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678693
10/24/26 09:33 AM
10/24/26 09:33 AM
Joined: Jan 2007
Wisconsin
M
Moosetrot Offline
trapper
Moosetrot  Offline
trapper
M

Joined: Jan 2007
Wisconsin
I have found that frost fleshing works very well. Boco on here is the one that got me going with it. It would be worth it for you to do some research on it.

Moosetrot

Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678727
10/24/26 10:45 AM
10/24/26 10:45 AM
Joined: Aug 2011
james bay frontierOnt.
B
Boco Offline
trapper
Boco  Offline
trapper
B

Joined: Aug 2011
james bay frontierOnt.
There are several popular ways to put up beaver.
No matter which method you use the end product should be the same.
Myself I can do beaver any way but my most efficient is to do a fast clean skin (leaves a bit of stuff on the pelt) then frost scrape later in the dead of winter when temps are cold enough (minus 25c or colder) and trapping has slowed down.
If you want to finish your beaver as you go,you can board right after clean skinning and scrape the skins to get rid of any flesh and get rid of the liquid grease.Basically the same step as frostscraping only not as quick or easy.
You can also rough skin beaver and flesh with a fleshing knife on the beam later.This is an extra step and is like skinning the beaver twice,but the initial skinning is a little bit faster than clean skinning.
As far as washing beaver pelts,the best time to get any mud etc out of the fur is right at the catch site.
As far as blood from skinning,the best way is to prevent the blood from getting in the fur in the first place.
The best way to prevent that is to let the beaver sit for a couple days in cool weather before skinning so the blood coagulates and the fur dries.
Another way to keep blood out of the fur when skinning is to skin on a screen rack that sits on your table.
If you do get blood in the fur,use a spray bottle with water to dilute the blood and soak it up with a rag.
Once the beaver pelts are dry.brush them out and blow the fur with a shop vac.This will get rid of any detritus and dried diluted blood left in the fur.

Last edited by Boco; 10/24/26 10:51 AM.

Forget that fear of gravity-get a little savagery in your life.
Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678768
10/24/26 12:55 PM
10/24/26 12:55 PM
Joined: Dec 2010
Armpit, ak
D
Dirt Offline
trapper
Dirt  Offline
trapper
D

Joined: Dec 2010
Armpit, ak
Measure the free hanging length and subtract 4". That will get you close to your starting length. Wash a beaver before skinning. If it is river silt, you will rid yourself of the big stuff rinsing at catch site. Not all finer particles will come out of a wet beaver. Washing them after skinned can cause the sand and silt to stick to the skin side. Better cleaning for fine particles will be after the fur is dry. Using vacuum, compressor, or beating a dry skinned hide like a rug.


Who is John Galt?
Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678772
10/24/26 01:09 PM
10/24/26 01:09 PM
Joined: Aug 2011
Craigmont, Idaho
M
marty weatherup Offline
trapper
marty weatherup  Offline
trapper
M

Joined: Aug 2011
Craigmont, Idaho
If you don't clean skin, get a top quality fleshing knife. As far as washing a dirty one, I brush them if they have any visible dirt. Washing a sixty pound beaver isn't fun unless you have a rack you can get it on. I wash after skinning them, in five gallon buckets of cold water, changing it as it gets dirty until I get a reasonably clean fur. Water doesn't have to be perfectly clear but if it still looks like the Missouri River during spring runoff, you probably need to rinse it a few more times.


Trail cameras and fresh snow have broke a lot of trapper’s hearts.
Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678807
10/24/26 02:20 PM
10/24/26 02:20 PM
Joined: Dec 2009
The Hill Country of Texas
Leftlane Offline
"HOSS"
Leftlane  Offline
"HOSS"

Joined: Dec 2009
The Hill Country of Texas
My advice would be to listen to everything Boco or Beaver Peeler has to say about catchin or finishing beaver but squelch out everything else they might post around here. grin


What"s good for me may not be good for the weak minded.
Captain Gus McCrae- Texas Rangers


Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678811
10/24/26 02:35 PM
10/24/26 02:35 PM
Joined: Jan 2009
Nebraska
Trapset Offline
trapper
Trapset  Offline
trapper

Joined: Jan 2009
Nebraska
I fleshed a lot of beaver before I learned to clean skin. Watch a few videos on clean skinning and learn to sharpen your knife. It’s well worth it imo. I’ll never go back to fleshing.

I usually try and wash critters in the water I catch them in as much as possible. If in a boat I throw a bunch of willows on the bottom to keep critters out of the mud and water. In the back of a truck I use anything to keep them off the bed, milk crates boards etc. I like to have heads facing back so wind blows against hair grain to help dry. I usually hang fresh beaver by a hind foot in front of fan and skin ones that were hanging from the day or so before. Beaver that have “firmed” up a bit are easier to clean skin than fresh ones. Hanging from back foot in front of fan over night gets the blood to move from base of tail area more towards head. I skin head off last so this helps keep skin and table cleaner. If you hang tail down or laying flat there is a lot of blood in base of tail area that gets everywhere before your done skinning.

For boarding i usually lay the hide down and the line closest to nose and tail is the line I follow. Usually staple nose, tail end then both sides to make a kite. If it seems real loose after these four staples I might move it out a line but usually not.

Re: Beaver tips and helps wanted [Re: Leftlane] #8678814
10/24/26 02:44 PM
10/24/26 02:44 PM
Joined: Jan 2009
Nebraska
Trapset Offline
trapper
Trapset  Offline
trapper

Joined: Jan 2009
Nebraska
Originally Posted by Leftlane
My advice would be to listen to everything Boco or Beaver Peeler has to say about catchin or finishing beaver but squelch out everything else they might post around here. grin


^^HA! And this of course! ^^

Re: Beaver tips and helps wanted [Re: Leftlane] #8678835
10/24/26 03:16 PM
10/24/26 03:16 PM
Joined: Feb 2020
Indiana
P
Providence Farm Offline
trapper
Providence Farm  Offline
trapper
P

Joined: Feb 2020
Indiana
Originally Posted by Leftlane
My advice would be to listen to everything Boco or Beaver Peeler has to say about catchin or finishing beaver but squelch out everything else they might post around here. grin


You are on a roll today.

Re: Beaver tips and helps wanted [Re: J Staton] #8678924
10/24/26 06:35 PM
10/24/26 06:35 PM
Joined: Dec 2006
Moved to Fbks, Ak.
M
martentrapper Offline
trapper
martentrapper  Offline
trapper
M

Joined: Dec 2006
Moved to Fbks, Ak.
Originally Posted by J Staton
Been a bit since I've put up beaver but if I remember correctly you measure hanging length of beaver, divide by half, and add that measurement to hanging length to get rough estimate on which line to stretch to.
(Hanging length/2) + hanging length= estimated stretch


I used an equation like that in the past. But first 8 nails works too.

Re: Beaver tips and helps wanted [Re: Wild Trapper] #8678931
10/24/26 06:41 PM
10/24/26 06:41 PM
Joined: Aug 2011
james bay frontierOnt.
B
Boco Offline
trapper
Boco  Offline
trapper
B

Joined: Aug 2011
james bay frontierOnt.
After you do a bunch you sort of just know which line a beaver will go on even before skinning it.
I have seen a method at the fur council skinning workshops that seems to work pretty good for beginners.
Take the beaver pelt,orient it so the head and tail are crossways on the board(side to side),then pull both sides of the pelt toward the top and bottom of the board fairly tight and that will give you the line to follow,when you re orient the skin correctly and start nailing.


Forget that fear of gravity-get a little savagery in your life.
Re: Beaver tips and helps wanted [Re: Boco] #8678975
10/24/26 07:51 PM
10/24/26 07:51 PM
Joined: Dec 2006
Oregon
beaverpeeler Offline
trapper
beaverpeeler  Offline
trapper

Joined: Dec 2006
Oregon
Originally Posted by Boco
After you do a bunch you sort of just know which line a beaver will go on even before skinning it.
I have seen a method at the fur council skinning workshops that seems to work pretty good for beginners.
Take the beaver pelt,orient it so the head and tail are crossways on the board(side to side),then pull both sides of the pelt toward the top and bottom of the board fairly tight and that will give you the line to follow,when you re orient the skin correctly and start nailing.

That sounds like it would work. But like you say, I know what size the beaver will make as soon as I take it off the hook. Every once in a while I have to pull out a couple nails and start over...but very rarely.


My fear of moving stairs is escalating!
Re: Beaver tips and helps wanted [Re: Wild Trapper] #8679020
10/24/26 10:11 PM
10/24/26 10:11 PM
Joined: May 2026
Manitoba
W
Wild Trapper Offline OP
trapper
Wild Trapper  Offline OP
trapper
W

Joined: May 2026
Manitoba
How do you freeze the pelt till winter till I have time to flesh and board them?


Wild Trapper
Re: Beaver tips and helps wanted [Re: Wild Trapper] #8679026
10/24/26 10:23 PM
10/24/26 10:23 PM
Joined: May 2011
Oakland, MS
yotetrapper30 Offline
trapper
yotetrapper30  Offline
trapper

Joined: May 2011
Oakland, MS
I fold them in half, flesh side together, and just lay them in the freezer.......


Coffee black
Cigarette
Start this day
Like all the rest.
Re: Beaver tips and helps wanted [Re: Wild Trapper] #8679031
10/24/26 10:31 PM
10/24/26 10:31 PM
Joined: Dec 2007
40 years Alaska, now back to O...
A
alaska viking Offline
trapper
alaska viking  Offline
trapper
A

Joined: Dec 2007
40 years Alaska, now back to O...
I fold them nose to tail, skin in, then fold again. After that, I roll them tight and put them in a gallon Ziplock, if they fit, or a couple of plastic grocery bags.
The idea is to keep the air from reaching the frozen hide.
I have also been known to freeze whole beaver for a month or two when crunched for time and had the freezer space.


Just doing what I want now.

Re: Beaver tips and helps wanted [Re: Wild Trapper] #8679157
10/25/26 08:49 AM
10/25/26 08:49 AM
Joined: Aug 2011
james bay frontierOnt.
B
Boco Offline
trapper
Boco  Offline
trapper
B

Joined: Aug 2011
james bay frontierOnt.
Originally Posted by Wild Trapper
How do you freeze the pelt till winter till I have time to flesh and board them?

I also fold the skin head to tail leather on leather fur out.Then roll up tight and in a heavy plastic bag.
I squeeze the air out and tie the bag.
I take a marker and write on the outside of the bag the species,date caught,and if a bad dmg skin I mark that on the bag as well.
If you are putting a bunch of those in the freezer at the same time,make sure they are spread out in the freezer.if you pile a bunch of unfrozen fur all at once in the freezer it can take a long time for the ones in the middle to freeze which can cause problems with spoilage..

Last edited by Boco; 10/25/26 08:50 AM.

Forget that fear of gravity-get a little savagery in your life.
Page 1 of 2 1 2
Previous Thread
Index
Next Thread