No Profanity *** No Flaming *** No Advertising *** No Anti Trappers ***NO POLITICS
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter
How long does it take you to skin a beaver? Do you hang, table, or cradle? I have only done a handful, so I am really slow. I did a 40 pound and a 56 pound today. It took me 1:15 to do the pair. No holes. Definitely NOT clean skinned either. This "Old Man" is still learning!
"Life's journey is not to arrive at the grave in a well-preserved body, but rather to skid in sideways,totally worn out,shouting... Wow-What a ride!"
I'm getting slower as I age but still cleanskin a blanket beaver in about 20 minutes. That includes taking out and cleaning/hanging the castors and bagging oil sacs. I use a trough mounted on a swiveling bar stool.
I'm getting slower as I age but still cleanskin a blanket beaver in about 20 minutes. That includes taking out and cleaning/hanging the castors and bagging oil sacs. I use a trough mounted on a swiveling bar stool.
You should really do a demo, video yourself putting up a beav and post it here.
Tsarevna (who used to be on here) did a video of me doing a clean skinning demo at a Klamath Falls OTC sale about 14-15 years ago. I think it still might be out there in You-Tube land. I think it went under the title of "How to Clean Skin A beaver". She set it to the music of Crocodile Dundee and gave commentary. LOL
I'm slow as can be, I don't do enough any more to stay in practice. Hadn't checked the time in years, but knew I was way slower than I used to be. Never was near as fast beaverpeeler, but then I never did near as many as him. lol. Out of curiosity I looked at the clock this year, first beaver of the year was a super blanket, and it took me right at 50 minutes to skin. That is clean skinned, but she'll take a little scraping still when she goes on the board, I always do to get that milky fat out of the hide. Just came in from doing a smaller beaver tonight and it took about 30 minutes to do it.
I do them on a table, usually with cord and hooks to hook the legs to pull against. Except this year, since I only had four traps out, I didn't get set up and didn't have my hooks on the cords, just looped them over the ends of the leg bones, which isn't quite as efficient.. Also, that first beaver time included setting up the cords midway through skinning. I have always wanted to try a trough, but haven't ever built one to try.
I also have slowed way down while skinning beaver , I have used a through , but preferred using a old kitchen table that I set up a bit higher then had tarp straps at 10 and 2 to hook into both ends of the carcass so when I was pulling and cutting I had resistance .
The clean up afterwards is much quicker on a table but you're results may vary ha has
There are plenty of guys faster than me. That said, the important number as far as I'm concerned is the total time involved in first touch to hanging your board up (or in my case turning it over for the second beaver). That usually is another 15 minutes for me on a blanket beaver.
By the time I clean skin a beaver, board it, drag the carcass out side, and then remove the skin from the board, I figure an hour of my life has been used up.
Who cares. Just over an hour for them two beaver is fine. If you start piling them up every day in spring you start getting quicker, but don’t look at the clock.
Wind Blew, crap flew, out came the line crew https://youtube.com/@drtrapping www.trapper.ca