General Trapping Archive


No Profanity *** No Flaming *** No Advertising *** No Anti Trappers *** No Politics
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter


Home~Trap Talk~ADC Forum~Trap Shed~Wilderness Trapping~International Trappers~Fur Handling

Auction Forum~Trapper Tips~Links~Gallery~Basic Sets~Convention Calendar~Chat~ Trap Collecting Forum

Trapper's Humor~Strictly Trapping~Fur Buyers Directory~Mugshots~Fur Sale Directory~Wildcrafting

Trapper's Tales~Words From The Past~Legends~Archives~Kids Forum~Lure Formulators Forum


~Catalog~

Print Thread
Hop To
How to make a cheap catch pole. #2280071
12/04/10 09:39 PM
12/04/10 09:39 PM
Joined: May 2010
Posts: 50
Central Virginia
V
VAcooner Offline OP
trapper
VAcooner  Offline OP
trapper
V

Joined: May 2010
Posts: 50
Central Virginia
I could use a little instruction to save an expense if possible. Does anybody have a tutorial or a link to one in the archives? I'm not sure which archive this would be in.




Re: How to make a cheap catch pole. [Re: VAcooner] #2280101
12/04/10 09:48 PM
12/04/10 09:48 PM
Joined: Nov 2010
Posts: 2
Southern MN 43
trapperMK Offline
trapper
trapperMK  Offline
trapper

Joined: Nov 2010
Posts: 2
Southern MN 43
How to make a cheap catch pole.

Hope this works. Very good video from the archives!





Originally Posted By: blackhammer
Like I said before PETA has never taken a trapping right from me but my fellow trapper has.
Re: How to make a cheap catch pole. [Re: trapperMK] #2280169
12/04/10 10:10 PM
12/04/10 10:10 PM
Joined: Jan 2010
Posts: 85
Georgia
F
firedawg Offline
trapper
firedawg  Offline
trapper
F

Joined: Jan 2010
Posts: 85
Georgia
i used a 3 or 4' piece of black 1" water pipe (lowes) threaded on both ends. bought 2 caps some ferrules, and coated 3/32 cable(don't remember exactly how long, but i would think 7-8 ft. then cut to what you need).

drill a hole in both caps bigger than the cable, smooth any rough edges(so it don't eat the coating off the cable). you can crimp or flatten the ferrule with a hammer on one end of the cable. you need to drill a hole all the way thru both sides of the pipe on one end about 1/2" below the threads--same size hole as the caps. thread the cable thru the hole on one of the caps and all the way thru the pipe. the ferrel will keep the cable from passing thru the cap. screw the cap onto the pipe and tighten with channel locks. thread the other cap thru the cable, but don't tighten yet. this will be the loop end for the cable. thread the cable thru the hole you drilled in the pipe. when you get the cable thru the drilled hole in the pipe(out the other side--complete pass thru), you can now tighten the cap with channel locks. now you will need a couple of feet of cable out the rear of the pipe to hold with your hand, and make the loop in the other end to the desired width. then cut the cable about 1" past the pipe(where the hole was drilled) and crimp a ferrule--you can use 2 if you wish(do not leave this inside the pipe--the cable will not slide!!). bend the cable and ferrules down towards the bottom of the pipe and tape tightly with electrical tape. now you are ready to go!!

i have used this on some STOUT coons and some fox.

I like the metal pipe, cause you don't have to worry about it bending or breaking with a stout animal.

hope that helped.

Re: How to make a cheap catch pole. [Re: VAcooner] #2280518
12/05/10 12:49 AM
12/05/10 12:49 AM
Joined: May 2010
Posts: 50
Central Virginia
V
VAcooner Offline OP
trapper
VAcooner  Offline OP
trapper
V

Joined: May 2010
Posts: 50
Central Virginia
Thanks gentlemen! Very much appreciated.

Matt




Re: How to make a cheap catch pole. [Re: VAcooner] #2280841
12/05/10 09:56 AM
12/05/10 09:56 AM
Joined: Jan 2008
Posts: 4,945
West Tennessee
PappyD Offline
trapper
PappyD  Offline
trapper

Joined: Jan 2008
Posts: 4,945
West Tennessee
Here's how I made mine. I got a 5 foot piece of 1" pvc pipe, an end cap, a clothes line tentioner and about 8 feet of 1/8 in coated cable. I drilled 2 holes in the end cap, ran the cable thru one hole, added a ferrel and samshed it with a hammer. Took the other end of the cable and ran it thru the other hole in the cap to make my loop.....



I then ran the cable up thru the entire length of the pipe, and thru the tentioner and simply glued the end cap and tentioner in place. It's light weight, and works well for me. It can be made for around 20 bucks. Hope this helps ya. I have heard some of the northern boys say they don't like pvc for the colder temps but this has performed well where I live.






Come November, critters will die!!!
Re: How to make a cheap catch pole. [Re: PappyD] #2280848
12/05/10 10:00 AM
12/05/10 10:00 AM
Joined: Dec 2006
Posts: 2,437
Peachland NC
D
David Underwood Offline
trapper
David Underwood  Offline
trapper
D

Joined: Dec 2006
Posts: 2,437
Peachland NC


No signature (can't write).
Charter member of the HAL fan club.
Only 4 miles from neil!
Re: How to make a cheap catch pole. [Re: VAcooner] #2280873
12/05/10 10:20 AM
12/05/10 10:20 AM
Joined: Feb 2007
Posts: 83
Indiana
G
gameboy Offline
trapper
gameboy  Offline
trapper
G

Joined: Feb 2007
Posts: 83
Indiana
Pappy, that is exactly how I made some but isn't that coated cable 3/16"?


Mark
Re: How to make a cheap catch pole. [Re: VAcooner] #2280879
12/05/10 10:24 AM
12/05/10 10:24 AM
Joined: Jan 2008
Posts: 4,945
West Tennessee
PappyD Offline
trapper
PappyD  Offline
trapper

Joined: Jan 2008
Posts: 4,945
West Tennessee
Mark, it may be with the coating, I'll have to check, I know it's sold as 1/8 inch coated cable.


Come November, critters will die!!!
Re: How to make a cheap catch pole. [Re: VAcooner] #2280889
12/05/10 10:31 AM
12/05/10 10:31 AM
Joined: Dec 2008
Posts: 28,715
Eastern Shore of Maryland
HobbieTrapper Offline
"Chippendale Trapper"
HobbieTrapper  Offline
"Chippendale Trapper"

Joined: Dec 2008
Posts: 28,715
Eastern Shore of Maryland
I used a six foot piece of galvanized fence post.


-Goofy-
Re: How to make a cheap catch pole. [Re: VAcooner] #2280961
12/05/10 11:15 AM
12/05/10 11:15 AM
Joined: Dec 2006
Posts: 1,661
south of little rock, ar
H
Haus Offline
trapper
Haus  Offline
trapper
H

Joined: Dec 2006
Posts: 1,661
south of little rock, ar
I've owned the cheap plastic one before. I also caught the land owners pit bull one day and was glad I had upgraded to a 5ft steel pole. You can go cheap, but spending $20 or $25 on one at your next trappers meeting is not a bad idea either.


A bobcat in your trap at 5:00am is better than a stout cup of coffee anyday.
Re: How to make a cheap catch pole. [Re: VAcooner] #2280978
12/05/10 11:27 AM
12/05/10 11:27 AM
Joined: Oct 2007
Posts: 760
Ohio
N
newears Offline
trapper
newears  Offline
trapper
N

Joined: Oct 2007
Posts: 760
Ohio
I made one years ago with an axe handle, cable loop running through eyes on handle fastened to dog chain, pull to tighten and hook dog chain to nail in axe handle to hold tight.Cost almost nothing.

Re: How to make a cheap catch pole. [Re: PappyD] #2281139
12/05/10 01:26 PM
12/05/10 01:26 PM
Joined: Jan 2010
Posts: 85
Georgia
F
firedawg Offline
trapper
firedawg  Offline
trapper
F

Joined: Jan 2010
Posts: 85
Georgia
Originally Posted By: PappyD
Here's how I made mine. I got a 5 foot piece of 1" pvc pipe, an end cap, a clothes line tentioner and about 8 feet of 1/8 in coated cable. I drilled 2 holes in the end cap, ran the cable thru one hole, added a ferrel and samshed it with a hammer. Took the other end of the cable and ran it thru the other hole in the cap to make my loop.....



I then ran the cable up thru the entire length of the pipe, and thru the tentioner and simply glued the end cap and tentioner in place. It's light weight, and works well for me. It can be made for around 20 bucks. Hope this helps ya. I have heard some of the northern boys say they don't like pvc for the colder temps but this has performed well where I live.







basically the same as i made mine, except i ran my loop end thru the side of the pipe instead of back into the cap. both work just fine!!

Previous Thread
Index
Next Thread

Moderated by  Wolfdog91 

Powered by UBB.threads™ PHP Forum Software 7.7.1