I thought i'd add a set that i used years ago after i received a couple dozen #55's with some really good strong springs. At first i made boxes for them but it got to be a pain in the butt remembering which section had the 55's on it so, presto, i came up with the idea of the coffee container set.
I kept the lid to hold the trap in place and just trimmed out the inside, this way the can could be wired in place to a tree, trap facing the ground with the outer part of the lid that was trimmed holding it in place.
I would wire a bit of bait to the inside top of the container, place the trap and snap on the lid, done. I usta run a couple of dozen of these mixed in and the red can actually acted as a visual aid to draw marten in. I used the larger 2 lb container and it has formed handholds that hold the bottom jaws of the trap snug up against it so the trap doesn't push in when a marten enters.
Just to be clear, i can't used this set anymore due to the AIHTS certified trap screw job we got in Canada but if the containers are available to folks in the states they might want to give it a whirl. It worked very well for me set about 3-4 ft high, very similar to a flower pot set.
Enjoy.





