Re: Marten set tutorial
[Re: Bushman]
#4127395
11/21/13 12:52 PM
11/21/13 12:52 PM
|
Joined: Dec 2006
Posts: 3,886 Bethel, AK
Kusko
"Mr. Mayor"
|
"Mr. Mayor"
Joined: Dec 2006
Posts: 3,886
Bethel, AK
|
yukon254, we use these. http://www.cabelas.com/product/Home-Cabin/Food-Processing/Food-Storage-Prep|/pc/104798880/c/104723280/sc/104344380/Elastic-Netting-Rolls/715435.uts?destination=%2Fcatalog%2Fbrowse%2Ffood-storage-prep%2F_%2FN-1101301%2FNs-CATEGORY_SEQ_104344380%3FWTz_l%3DSBC%253BMMcat104798880%253Bcat104723280&WTz_l=SBC%3BMMcat104798880%3Bcat104723280%3Bcat104344380 A roll get's us a lot of bait. One year we got all of our friends to save their onion bags.
"There are three things I have learned never to discuss with people: religion, politics and the Great Pumpkin." Linus Van Pelt www.alaskafinandfur.com
|
|
|
Re: Marten set tutorial
[Re: Bushman]
#4127463
11/21/13 01:29 PM
11/21/13 01:29 PM
|
Joined: Dec 2006
Posts: 2,270 Homer, Alaska
Family Trapper
trapper
|
trapper
Joined: Dec 2006
Posts: 2,270
Homer, Alaska
|
I set conbibears on leaning pole for a long time with nails. Last year I got this idea. Have you ever put up a dead marten to a 110 or 120 in the standing position. It is no wonder so often they choose an alternate route. They look pretty large to be going through that sized square. Having to lean down to do it. ;0) This is something I came up with. Cut just wide enough that a slight pressure is on the spring. Attached with a screw gun. Or nails. If I made them again I would put the jaw inset closer to the top.
|
|
|
Re: Marten set tutorial
[Re: trapperjoeAK]
#4128961
11/22/13 12:59 AM
11/22/13 12:59 AM
|
Joined: Jul 2008
Posts: 1,045 Alaska
garyalaska
trapper
|
trapper
Joined: Jul 2008
Posts: 1,045
Alaska
|
They are "classic 600"s. Basicly 9" across. Which sounds huge, but one size smaller and they don't fit in my experience. These fit all brands 120's I have including belisles. Quick picture of fit. I use classic 300 if you insert it 1/2" into pot then set the trigger the pot will expand and hold the trap rock solid. I have done it at -30 and it works fine. I hate using wire so I just cut s lit in top of pot and slid lath under jaws and through pot.
|
|
|
Re: Marten set tutorial
[Re: mad_mike]
#4129555
11/22/13 11:37 AM
11/22/13 11:37 AM
|
Joined: Dec 2007
Posts: 5,538 Oregon
alaska viking
"Made it two years not being censored"
|
"Made it two years not being censored"
Joined: Dec 2007
Posts: 5,538
Oregon
|
I like the rig! I want to try those mounted to big alder or dead spruce. Bet I know what you are doing this weekend! I'll have to see if I need anything welded.
Just doing what I want now.
|
|
|
Re: Marten set tutorial
[Re: Bushman]
#4129585
11/22/13 11:51 AM
11/22/13 11:51 AM
|
Joined: Jul 2008
Posts: 288 Circle, Alaska
Birchcreekkid
trapper
|
trapper
Joined: Jul 2008
Posts: 288
Circle, Alaska
|
Ya you might be able to make some extra $$$ there 378, keep us posted............
I once held the yardstick of another's perfection, I threw it down and carved my own........
|
|
|
Re: Marten set tutorial
[Re: Bushman]
#4136592
11/25/13 10:40 PM
11/25/13 10:40 PM
|
Joined: Nov 2013
Posts: 52 Colwell Lake, Manitoba
Bravo Bad Back
trapper
|
trapper
Joined: Nov 2013
Posts: 52
Colwell Lake, Manitoba
|
I thought i'd add a set that i used years ago after i received a couple dozen #55's with some really good strong springs. At first i made boxes for them but it got to be a pain in the butt remembering which section had the 55's on it so, presto, i came up with the idea of the coffee container set. I kept the lid to hold the trap in place and just trimmed out the inside, this way the can could be wired in place to a tree, trap facing the ground with the outer part of the lid that was trimmed holding it in place. I would wire a bit of bait to the inside top of the container, place the trap and snap on the lid, done. I usta run a couple of dozen of these mixed in and the red can actually acted as a visual aid to draw marten in. I used the larger 2 lb container and it has formed handholds that hold the bottom jaws of the trap snug up against it so the trap doesn't push in when a marten enters. Just to be clear, i can't used this set anymore due to the AIHTS certified trap screw job we got in Canada but if the containers are available to folks in the states they might want to give it a whirl. It worked very well for me set about 3-4 ft high, very similar to a flower pot set. Enjoy.
Trapline #53 - Split Lake Northern Manitoba
|
|
|
Re: Marten set tutorial
[Re: Bravo Bad Back]
#4137213
11/26/13 10:33 AM
11/26/13 10:33 AM
|
Joined: Dec 2010
Posts: 11,676 Armpit, ak
Dirt
trapper
|
trapper
Joined: Dec 2010
Posts: 11,676
Armpit, ak
|
Just to be clear, i can't used this set anymore due to the AIHTS certified trap screw job we got in Canada but if the containers are available to folks in the states they might want to give it a whirl.
Oh My!
Who is John Galt?
|
|
|
Re: Marten set tutorial
[Re: Bushman]
#4137318
11/26/13 11:49 AM
11/26/13 11:49 AM
|
Oh Snap
Unregistered
|
Oh Snap
Unregistered
|
|
|
|
|
|