Re: Bodygrippers for fisher
[Re: rick olson]
#7574713
05/01/22 10:34 PM
05/01/22 10:34 PM
|
Joined: Jul 2009
Posts: 2,794 100 Mile House, BC Can
bctomcat
trapper
|
trapper
Joined: Jul 2009
Posts: 2,794
100 Mile House, BC Can
|
155's are very good all purpose boby grip trap for fisher and marten. As are 120's with pan triggers. I have been using pans on 120 traps for many years placed within 4-5" of the bait for fisher and get a consistent humane catch virtually every time. The reason being that they are stable at the bait and standing on the pan or bumping it with their chest or head while working the bait, NOT MOVING through the trap to get to the bait. You will get a neck catch on the fisher every time. The pan trigger setup provides an open entry space without any trigger wires in their face that may deter them from entering thru the trap.
The only constant in trapping is change so keep learning.
|
|
|
Re: Bodygrippers for fisher
[Re: poconobear]
#7575332
05/02/22 08:21 PM
05/02/22 08:21 PM
|
Joined: Jul 2009
Posts: 2,794 100 Mile House, BC Can
bctomcat
trapper
|
trapper
Joined: Jul 2009
Posts: 2,794
100 Mile House, BC Can
|
Furture to my previous post, in over 20 years trapping fisher I have never seen one fail to enter a 120 elevated box set, on a leaning tree or pole set, when it has climbed to the box. But I have seen them not climb the tree or pole for unknown reasons.
The only constant in trapping is change so keep learning.
|
|
|
Re: Bodygrippers for fisher
[Re: poconobear]
#7576875
05/04/22 07:47 PM
05/04/22 07:47 PM
|
Joined: Dec 2006
Posts: 41,838 Northern Maine
Bruce T
trapper
|
trapper
Joined: Dec 2006
Posts: 41,838
Northern Maine
|
What do you all think of a 155 for fisher? Pros and cons Thanks Work great if you spread the triggers out wide and up away from the trap when set.
Nevada bound
|
|
|
Re: Bodygrippers for fisher
[Re: trapperman222]
#7576898
05/04/22 08:01 PM
05/04/22 08:01 PM
|
Joined: Dec 2006
Posts: 62,993 Minnesota
330-Trapper
trapper
|
trapper
Joined: Dec 2006
Posts: 62,993
Minnesota
|
My go to are 160 Belisle for fisher and marten. I'm sure 155s will work fine. Had to many refusals with 120s so went to 160s. I use 160 belisles and 220s
NRA and NTA Life Member www.BackroadsRevised@etsy.com
|
|
|
Re: Bodygrippers for fisher
[Re: poconobear]
#7577198
05/05/22 07:18 AM
05/05/22 07:18 AM
|
Joined: Dec 2006
Posts: 3,719 Maine
Mac
trapper
|
trapper
Joined: Dec 2006
Posts: 3,719
Maine
|
What do you all think of a 155 for fisher? Pros and cons Thanks I like the 155s but have also has great success with the 120. Mac
|
|
|
Re: Bodygrippers for fisher
[Re: rick olson]
#7577526
05/05/22 06:08 PM
05/05/22 06:08 PM
|
Joined: Dec 2006
Posts: 41,838 Northern Maine
Bruce T
trapper
|
trapper
Joined: Dec 2006
Posts: 41,838
Northern Maine
|
I was mainly targeting marten and using 120's I had a few refusals from male fisher mainly so I went to the 155's,there almost perfect for both.If I didn't have marten I would run 100% 160's with hardwood pans Belisle. Me as well.I don't like the 160's for marten.
Nevada bound
|
|
|
|
|