I have some 110s that have so sensitive of a trigger that they won’t stay set so is there any way to file the dog and fix it or do I have to get some new ones? If I have to get some new ones what is the best brand?

Trapper E, Try The Basic Sets section on the forum. There is a section under miscellaneous that has diagrams on adjusting the dog and trigger. Eric

ABeardedTrapper, you beat me by 12 seconds!

Your post was more efficient, Takes him right to where he needs to go. Eric

Well I’m goin to try and make the dog deeper, thanks for the help everyone!

Thanks again for the help

Thanks. I needed that too.

Before messing with the dog, set the trap without the trigger wire clip. Move that off to the side and just place dog alone on the bar. If the trap stays set, fault is not in the dog. From what I can tell, it rarely is. Fault is usually with trigger wire clip.

huh ok i will try that

Is your jaw clean of any wax,paint or dip?
just

Yes it is

Then there are 2 things it could be. Dog is worn or hinges are worn.
Maybe a third. if jaws are bent out of shape.
just

One particular brand is notorious for their 110s not being able to stay set straight from the factory. The dog notches were never cut to the proper size.

It’s on my victor square jaws I bought, got 57 and 4 have dog issues