No Profanity *** No Flaming *** No Advertising *** No Anti Trappers ***NO POLITICS
No Non-Target Catches *** No Links to Anti-trapping Sites *** No Avoiding Profanity Filter
I know nothing about snares, but if the goal is just to make it obvious it cannot be opened more than 12 inches, why not just put a wire rope clamp on it as a stop? sample
less than $1, installs in 10 seconds, adjustable, and if you can take it off and reuse it later if you want.
I know nothing about snares, but if the goal is just to make it obvious it cannot be opened more than 12 inches, why not just put a wire rope clamp on it as a stop? sample
less than $1, installs in 10 seconds, adjustable, and if you can take it off and reuse it later if you want.
Takes all of 20 seconds to take the end of a piece of 16/14/11 gauge wire, bend it over into a C with a pair of needle nose pliers, cut the C off the wire and crimp the C onto the snare. Plus it would not nearly be as heavy, bulky and shiny as a cable clamp..
For your convenience smash just make them or order them to your states requirements. One and done. After a catch save the parts and have purchased parts to build more. Snare building is cheap especially if you already have the parts..
I tie a simple knot in mine, the cable is junk once you catch anyway, so as Seldom said, mark it with a sharpie, twist a loop, thread the end back thru and pull it tight, done. I operate cranes for a living and while I would not lift bridge beams that way I'd hold every coyote ever with a knotted cable. Crazy white folks, I swear.
Regular joe I actually thought of a knot so help me!!
That means you can think outside the box, tie one, set one, catch one!!! I am not an expert, but i have pen from Holiday In Express in my check book! I hope you El Smash 'em!!!
Just go to a bait shop and buy a small bag of split shot and smash it on with some channel locks. I wouldn't tie a knot in them, it's hard enough to get them them loaded and hanging perfectly without adding a kink in the cable. Or go to the hardware store and buy a couple feet of 16ga wire and cut 1/2 inch pieces off it and put them in a vice and bend them in a V like the pic above, then smash them on with channel locks.
"Where Can A Man Find Bear Beaver And Other Critters Worth Cash Money When Skinned?"
![[Linked Image]](http://sniperstrappingplace.com/greysig.png)
![[Linked Image]](https://trapperman.com/forum/attachments/usergals/2025/01/full-54842-243510-screenshot_2025_01_11_20_54_52_88_40deb401b9ffe8e1df2f1cc5ba480b12.jpg)
