I’m stretching my beaver on plywood right now and was wondering how people are either hanging them somehow, or propping them on a wall, or have made a little contraption to hold them.

So I guess what I am asking is where do you put the beaver boards after you tack them on the board.

Stack them on a flat surface. Fur to fur, skin to skin

Drill a 3/4 inch hole near the top and bottom in the midline,
Put a skin on each side of the board to dry and hang the boards on a nail from the rafters in your basement or shed.
Once they are dry you can stack them like Kre said.If they curl lay them on a beaver board and put another beaver board on top as you add to the stack

I have patterns for beaver sketched across the inside and outside walls of my fur shed, I nail them straight to the walls and both sides of the door.

I wouldnt want to replace walls when the beaver boards wear out,lol.
Mine are ready to cut into marten boxes in 4 or 5 years.

I built it with 3/4" plywood and siding (I had both laying around) so it isn't really hurting anything, I might replace the siding in 6 or 7 years if I trap enough beaver and I get offered to haul away more building materials when people order the wrong stuff, if not oh well.

I scored a bunch of 3/4 inch plywood last fall.
40 full sized sheets.It was used as forming for a bridge job there must have been a hundred sheets or more and a huge pile of 2x4s and 2x6s.I asked the guy at the bridge I they were scrapping it all and he said yes.I asked if I could salvage some,he said go ahead but there were already people hauling it off.I filled the truck bed and a trailer with plywood,no room for very much 2x4s but I did get some.
I got enough 3/4 inch plywood now for beaver boards for the rest of my life and then some,lol.
Only had to pull a few nails around the edges.

A good friend of mine works for a residential construction outfit down in Anchorage, so when they order the wrong stuff, or get too much he calls me and I hitch up a trailer and go get everything I can fit. I have about enough to start building my own Dr. Seuss house lol

Gotta love free plywood with the price of it nowadays.
I was burnt out after loading those 40 sheets.I went back next day and it was all gone every stick and sheet and even the pieces,lol

Dang! Would have loved to get in on a deal like that. Good for you Boco. Probably would have been frowned upon to ask if they deliver?

I get plywood, siding, metal roofing, all sorts of 2x materials, and plenty of 4x and 6x beams and posts. Plus more nails and screws than I could ever possibly use. He really is a handy friend to have around. All he asks in return is when they get behind schedule clearing new lots I come run an excavator for a few days at a time to pick up the slack. He's tried to hire me a few times, but I can't reasonably commute that everyday and I wholeheartedly refuse to live in Anchorage.

Holy smokes! 40 sheets of 3/4?!? You could’ve redone your teeth like Lamar if you sold em….lol