A guy went through the car wash with a roll of high-tensile fence wire in the bed of his truck.
It didn't turn out well.

[video:youtube]https://www.youtube.com/shorts/HvDygUgq6tc[/video]

Wire looks clean. I don't see the problem?

They have signs at the car washes here to not have any loose stuff in the bed of your truck.

Good pair of wire cutters and you could have that straightened out in 30-45min I bet (unless there is more damage than some wire rolled around the roller)

Not tight enough to be a problem. Iv cut worse off my brush hog.

Holy Cow...

My whole place is done up in high tensile. I would not want to clean that mess up

Start making drowners and snare supports...

That looks like an insurance deal to me. Those reels are made for 100 lb rolls and there looks to be about a hundred pounds on the reel still in the back of the truck! Looks like at least a hundred pounds wound up in the car wash? inquiring minds want to know.

Oh NO!!!!!!!!!!!!!!!!!!!!!

From what I read there was significant damage to the car wash and to the vehicle behind the truck.

I wouldn't try that. The stuff is way to stiff I cut it with a grinder or bolt cutters. It will stop the bush hog really fast.

X2

Curious what the damage was to the white car behind him.

Hope he has real good insurance

A grease covered ball would be better than that.

I thought only I was the only one who's brush cutter looked like that.

That's a "reel" backlash! Did not have his drag set correctly!.

Bryce