Anyone mess with .300wsm ?
#7725436
11/23/22 08:37 PM
11/23/22 08:37 PM
|
Joined: Jul 2013
Posts: 10,908 Amite county Mississippi
Wolfdog91
OP
trapper
|
OP
trapper
Joined: Jul 2013
Posts: 10,908
Amite county Mississippi
|
So got a buddy with a nice one and hes offering to pay for the components if I'll reload for him. Said I can keep the rifle for as long as I need, so seem like a good deal to me. I have a hand full of folk who I do it for from time to time . Just wondering though if anyone hear mess with it any ? Apparently alot of bench rest guys like it. Easy to "tune" alot of them say. Anyway for y'all who mess with it any particularities this cartridge has that just stand out ? Strange Enough can't find a ton on the YouTube about it
Trappermans Resident Black Guy The Black Redneck! 22yrs MS National Guardsmen I Like Moddin Traps 'N Trapping Possums Go Ordnance!!!! Tman Archivist
|
|
|
Re: Anyone mess with .300wsm ?
[Re: Yes sir]
#7725460
11/23/22 09:10 PM
11/23/22 09:10 PM
|
Joined: Jul 2013
Posts: 10,908 Amite county Mississippi
Wolfdog91
OP
trapper
|
OP
trapper
Joined: Jul 2013
Posts: 10,908
Amite county Mississippi
|
U remember how well u liked the 270???.... ....did I tell you my dad just got a 45-70 I'm about to start loading for  That being said factory loads with that .270 ain't too bad at all lol , sill convinced her dad loaded them shells for me and just labeled them 1991 
Trappermans Resident Black Guy The Black Redneck! 22yrs MS National Guardsmen I Like Moddin Traps 'N Trapping Possums Go Ordnance!!!! Tman Archivist
|
|
|
Re: Anyone mess with .300wsm ?
[Re: Wolfdog91]
#7725466
11/23/22 09:16 PM
11/23/22 09:16 PM
|
Joined: Jul 2016
Posts: 1,482 Ne pa
Jerry Jr.
trapper
|
trapper
Joined: Jul 2016
Posts: 1,482
Ne pa
|
One of the things that I noticed when reloading for it was that you need to set your sizing die while resizing them. I needed to have the shell plate touching the die when sizing the cases. If not it was hard to close the bolt and extraction was difficult, even on starting loads. Another is that they like 180 SBT tips. This was with two rifles. The ballistics show it has some good potential.
Time is more precious than gold if you know how to spend it .... but what do I know, I'm just a dumb farmer.~My Dad NRA LIFE MEMBER, Endowment Member
|
|
|
Re: Anyone mess with .300wsm ?
[Re: Jerry Jr.]
#7725471
11/23/22 09:20 PM
11/23/22 09:20 PM
|
Joined: Jul 2013
Posts: 10,908 Amite county Mississippi
Wolfdog91
OP
trapper
|
OP
trapper
Joined: Jul 2013
Posts: 10,908
Amite county Mississippi
|
One of the things that I noticed when reloading for it was that you need to set your sizing die while resizing them. I needed to have the shell plate touching the die when sizing the cases. If not it was hard to close the bolt and extraction was difficult, even on starting loads. Another is that they like 180 SBT tips. This was with two rifles. The ballistics show it has some good potential. If you don't mind me asking how much where you bumping your shoulder back ?
Trappermans Resident Black Guy The Black Redneck! 22yrs MS National Guardsmen I Like Moddin Traps 'N Trapping Possums Go Ordnance!!!! Tman Archivist
|
|
|
Re: Anyone mess with .300wsm ?
[Re: Wolfdog91]
#7725499
11/23/22 09:51 PM
11/23/22 09:51 PM
|
Joined: Aug 2010
Posts: 10,524 Asheville, NC
charles
trapper
|
trapper
Joined: Aug 2010
Posts: 10,524
Asheville, NC
|
I have a 300 wsm I bought when they first came out. Mine is a mod 70 Win. Put a Jewell trigger in it. Went on two elk hunts and killed a large Montana whitetail. Too much gun for NC. Hasn’t seen daylight in over ten years.
Got a fortune in the scope and Jewell trigger, plus gunsmith fees. My 7 Rem Mag doesn’t come out to play either. Neither did my heavy barrel 280AI that I eventually sold.
Mostly hunt with 25-06, 7mm-08, 270, and occasionally a 280 Mountain and a 308 Model 7. No more magnums for me. Considering a 22-250. Had four shoulder surgeries. I am a wussy now at 76.
Do you have a specific question regarding the round? I loaded 180 for elk and 150 for deer.
Last edited by charles; 11/23/22 09:53 PM.
|
|
|
Re: Anyone mess with .300wsm ?
[Re: Wolfdog91]
#7725602
11/24/22 12:27 AM
11/24/22 12:27 AM
|
Joined: Oct 2011
Posts: 2,120 Idaho
bearcat2
trapper
|
trapper
Joined: Oct 2011
Posts: 2,120
Idaho
|
They work well, fairly popular out west, short action for a shorter bolt throw, but you usually sacrifice one round in the magazine for that short action. The hype with the short mags when they came out was that they were inherently more accurate than the regular long action magnums, more efficient, and less recoil. More efficient maybe, but I don't really buy the other two. Too much depends on other factors for that, and I believe they were often enough chambered in newer guns that were designed for better accuracy and less felt recoil than some of the older magnum rifles, but I've shot some short mags that kicked like a mule, and others that didn't hardly kick at all.
I'd look at loading 180s in it, if it has room in the magazine for longer OAL and the twist to stabilize them you can play with some of the long, heavy, low drag bullets designed for long range. I know a few guys that shoot 210 Bergers in them with great results, but not all guns will stabilize them, and some of them guys can only load one in the chamber and one in the magazine because they are too long to fit down in the magazine.
|
|
|
Re: Anyone mess with .300wsm ?
[Re: Wolfdog91]
#7725637
11/24/22 04:23 AM
11/24/22 04:23 AM
|
Joined: Feb 2014
Posts: 208 SW Iowa
iowayote
trapper
|
trapper
Joined: Feb 2014
Posts: 208
SW Iowa
|
Reloading for another person is a liability issue. If his gun blows up, he's comin for you. Don't do it.
I will gladly feast on those who would subdue me.
|
|
|
Re: Anyone mess with .300wsm ?
[Re: Wolfdog91]
#7725786
11/24/22 07:54 AM
11/24/22 07:54 AM
|
Joined: Jan 2008
Posts: 2,913 USA MN
Snowpa
trapper
|
trapper
Joined: Jan 2008
Posts: 2,913
USA MN
|
Had and still have my 300WSM accurate hard hitting and will do anything a 300 mag will do .
Never Confuse Stupid With Crazy
|
|
|
Re: Anyone mess with .300wsm ?
[Re: Snowpa]
#7725791
11/24/22 07:58 AM
11/24/22 07:58 AM
|
Joined: Jul 2013
Posts: 10,908 Amite county Mississippi
Wolfdog91
OP
trapper
|
OP
trapper
Joined: Jul 2013
Posts: 10,908
Amite county Mississippi
|
Had and still have my 300WSM accurate hard hitting and will do anything a 300 mag will do . What's recoil like between the two ?
Trappermans Resident Black Guy The Black Redneck! 22yrs MS National Guardsmen I Like Moddin Traps 'N Trapping Possums Go Ordnance!!!! Tman Archivist
|
|
|
Re: Anyone mess with .300wsm ?
[Re: charles]
#7725793
11/24/22 07:59 AM
11/24/22 07:59 AM
|
Joined: Jul 2013
Posts: 10,908 Amite county Mississippi
Wolfdog91
OP
trapper
|
OP
trapper
Joined: Jul 2013
Posts: 10,908
Amite county Mississippi
|
I have a 300 wsm I bought when they first came out. Mine is a mod 70 Win. Put a Jewell trigger in it. Went on two elk hunts and killed a large Montana whitetail. Too much gun for NC. Hasn’t seen daylight in over ten years.
Got a fortune in the scope and Jewell trigger, plus gunsmith fees. My 7 Rem Mag doesn’t come out to play either. Neither did my heavy barrel 280AI that I eventually sold.
Mostly hunt with 25-06, 7mm-08, 270, and occasionally a 280 Mountain and a 308 Model 7. No more magnums for me. Considering a 22-250. Had four shoulder surgeries. I am a wussy now at 76.
Do you have a specific question regarding the round? I loaded 180 for elk and 150 for deer. Nothing specific really past mabye a favorite powder but other then that just wanted to see what everyone whose messed with them thought about them and just perticular quirks they may have found
Trappermans Resident Black Guy The Black Redneck! 22yrs MS National Guardsmen I Like Moddin Traps 'N Trapping Possums Go Ordnance!!!! Tman Archivist
|
|
|
Re: Anyone mess with .300wsm ?
[Re: Wolfdog91]
#7726008
11/24/22 12:46 PM
11/24/22 12:46 PM
|
Joined: Oct 2019
Posts: 1,319 Custer Co, Idaho
sneaky
trapper
|
trapper
Joined: Oct 2019
Posts: 1,319
Custer Co, Idaho
|
I have a 300 wsm I bought when they first came out. Mine is a mod 70 Win. Put a Jewell trigger in it. Went on two elk hunts and killed a large Montana whitetail. Too much gun for NC. Hasn’t seen daylight in over ten years.
Got a fortune in the scope and Jewell trigger, plus gunsmith fees. My 7 Rem Mag doesn’t come out to play either. Neither did my heavy barrel 280AI that I eventually sold.
Mostly hunt with 25-06, 7mm-08, 270, and occasionally a 280 Mountain and a 308 Model 7. No more magnums for me. Considering a 22-250. Had four shoulder surgeries. I am a wussy now at 76.
Do you have a specific question regarding the round? I loaded 180 for elk and 150 for deer. Nothing specific really past mabye a favorite powder but other then that just wanted to see what everyone whose messed with them thought about them and just perticular quirks they may have found H4831SC and IMR7828SSC are two you should look at. The 4831SC being the preferred of those two
Sometimes nothing can be a real cool hand
|
|
|
|
|