That's awesome swamp

outta curiosity you ever mess with the little gadgets that let you draw last the rest of the bow ? Forgot what they where called , but I see them on old bows semi frequently
Are you referring to an overdraw? If so, yes. Those were the shiznit back in the early 90s. Just about every compound archer had a bow with an overdraw. It allowed for shorter (and lighter) arrows...which translated to faster speeds...which meant flatter trajectories (less critical range guess-timation) at 3D target and typical hunting ranges. This was before handheld laser rangefinders became readily available/affordable and we all launched aluminum arrows of various diameters depending on draw weight.
The overdraws came in various lengths and were usually built by the bow manufacturers to custom fit their bows only, but there were some aftermarket, too. Most allowed the rest to be 3" to 4" behind the riser (and your bow hand/wrist). So, if you're draw length required a 29" arrow....you could shoot a 25" lighter arrow...... for speed, speed, speed! But, arrow lengths shorter than 24" or 25" were dangerous and hit that diminished returns area. Plus, if the arrow happened to fall off the rest before you released that string...the arrow tip could go into/thru your hand or wrist as it was beginning its launch from behind your hand...not a good thing! Not many of us cared about the danger...we just wanted that extra speed and easier accuracy.
The bow breaking in half that I described above was with a bow with an overdraw. I was lucky that the arrow launched from the rest a little and fell to the ground, but that machined aluminum overdraw bit hard into the top of my left wrist. Not fun!