I hate when that happens too!!!!!

Lots of things cause a "flier".

Narrowing down which thing caused it is the problem. I've been playing with neck tension. Next I'm going to start marking the case that gives me a flier.

Man your sub MOA at a grand Indian wanna hear it from you

That's the trick Wolf, keeping your groups under an inch counting the flier.

And trust me, not all days come up aces!

Ive got guns that shoots consistent sub 1/2 moa and guns that will consistently throw flyers. I think more often the gun or load causing them especially when your other shots are consistently tighter. There's sometimes humility in realizing ur gun or load is throwing flyers. Sometimes you can be loaded on a narrow node or on the edge of a node and have consistently tight groups then turn around and your next group can fall apart. But that's my experience and opion. Im pretty much a own ur whole group kind of guy and if u want a better group fix the problem instead of dropping shots to get a better groups.

One thing I see too for me and the boys is if we are supporting the gun front and rear and we are pulling shoots it tends to string them left and right more so than vertically. But I wouldn't argue that one to the grave at this point in my experience.

Had a Tikka in 270 that would always throw the 3rd shot. First 2 shots under an moa if you were a good shot then it would throw the 3rd an 1 1/4 to 1 1/2 away. Very very consistent with both me and the boys shooting it. Did some work on the stalk and got to be a consistent sub moa gun.

Ya jinxed me !!!

Woke up to perfect conditions so went to shoot a group with my Krieger barreled 300 Weatherby.
4 shots @500yds a quarter would cover and then it happened.



Your fault Wolfdog!

Hay hay hay that all you you got a fancy high class big boy rifle with a LEUPOLD! Would be a Lazer beam btw I saw you sent me a txt but my phones being stupid, not ignoring you lol

This gun has a 350$ Athlon on it. Nothing fancy cept the barrel.

And it is your fault !

Wolfdog91, can you post some pictures of the side discharge and bolt. Does it have a bcg like a normal M-16 or AR with a charging handle. I think I would like the side discharge so I did not have to fight the scope when charging.

… just dropping in to check on things

.. everything seems to be on the up and up

…carry on

Aye deputy need to whisper in boss mans ear and get a shooting sub form made up.

…. I’m not a fan of sub forums- over

Not my pictures , sorry didnt think to do a full break down if the bolt but found this one . But yes it's basically a slightly modified regular BCG . Personally I'm. Loving to more and more ...only issue really is it's easier to get first in there and I haven't figured out a brass catcher deal yet.

Do you just take the bolt handle off and the BCG come out the same? That is how it looks to me what I can see of it.

Just ordered a chassis and barrel for my next new one.

Won’t get serious till next year.

Gonna try a quarter bore Creedmoor.

Yeppers , you undo one Allen screw and it pops out just like a regular bcg

been seeing a little about the new .25 creed. Watcha think about it ?