Have a big roll of 1/16" 7x7 cable. Have camlocks and homemade locks. This stuff atout enough for bobcats and raccoons? Have read mixed thoughts on it.

Fine for bobcats, for raccoons not so much unless you neck snare them and can either use kill springs or get them to tangle up

Whats the go to for yotes and coons?

i use 1/16 1x19 on yotes. 5/64th 1x19 on coon

Swivel everything, occasionally 1/16” 1x19 will kink enough times to lose a coyote….every extension has a swivel on it.

I have home made swivels, is there better ones to use?

Heavy duty 6/0 or 9/0 barrel swivels or trap swivels.

1/16 7x7 is good for cats and fox and under ice beaver.
Set them lethal for cats and fox(kill stick);No need for swivels or extra jewellery that way.
For under ice beaver leave a 3/4 inch tail on the tie off loop to tuck the lock under.
7x7 when set for under ice beaver fires easily when placing the pole or from swimming beaver circling the pole,that why you need the tag end to tuck the lock.

Have a bunch of cam locks to use up. 60" a pretty standard length? Be better making snares and sellin em to upgrade to bigger cable?

I built a dozen and a half 5/64 x 1x19, 60” long,today Double ferrule loop on the end,and I will use an extension that has the swivel on one end and I quick link to that. These are my preferred coyote snare.

I make my snares just big enough to make the loop,I tie off with wire which is also the support.Same set up for all my snares.Tie off support is number 9 for wolf and the others double 14 ga.I like a 7-8 inch loop for cats and fox a 10 inch loop for under ice beaver and a 14-16 inch loop for wolf.I use 3 32 1x19 for wolf and 1 16 1x19 or 7x7 for fox cats and under ice beaver.I use a toothed cam lock for the wolf snares and either an adams lock or cam lock for the beaver cat or fox snares.

I’ve taken instructions from a couple experienced snaremen including Newt Sterling and Ron Jones. Both suggest 1x19 5/64 fully loaded. At the suggestion of Dale Billingsley, I’ve a few 1/16 7x7 and a lot of 5/64 7x7. Most of what I use today are 5/64 7x7 and I’ve taken coon, beaver, fox and coyotes.

This will be my first year using the 1/16. I think they’ll work fine for beaver and fox. Not so sure about coon and coyotes. It will be an experiment.

Well i guess all i can do is try it. Really just want to try for bobcats down along our river.

That will only work if it's a high grade 1X19 in the 1/16th, preferably Korean cable.
7X7 -1/16th is a mink or small game snare cable

Raccoon will fray 1/16th cable and . . .
Much of 7X7 -1/16th cable sold in the U S is garbage.

The first snare I checked this morning was a 7x7 1/16, that had a 30-inch extension of 7x7 3/32 connected to an earth anchor. The coon was neck caught. The cables were separated with a #9 crane swivel. The 1/16 cable was kinked but not frayed.